The design of automatic washing machines includes such elements as filters: drain and jellied. They provide protection of equipment from pollution and breakdowns. In order for filters to fulfill their functions, they are periodically cleaned.
Manufacturers recommend doing this every six months. Having figured out how to clean the filter in the washing machine, you can do it yourself, without professional support. You must admit that such skills will save the family budget and allow you to solve the problem quickly, without waiting for the master to come.
But before starting work, it is necessary to study all the nuances of the process. We will tell you what are the reasons for a quick clogging of the filter and how to understand that it is time to clean it. In addition, we provide step-by-step instructions for removing contamination, and also list methods for preventing clogging of the filter device.
Cleaning the drain filter
Using a drain filter, waste water is cleaned of various debris (coins, buttons, etc.). The filter element may become clogged by the presence of impurities and heavy elements in the water.
Cleaning is necessary in order to prevent small organic and inorganic impurities from getting into the pump and nozzles, which can damage parts.
A clogged filter reduces the throughput of the drain channel, while increasing the load on the pump system. As a result, the pump wears out faster.
Signs of cleaning
The drain filter is also called drainage, trash and pump filter.
Signs indicating the need for the procedure are:
- termination of all functions;
- difficulties in draining the liquid, during which it slows down or completely stops;
- when switching to the "Spin" mode, the system instantly turns off;
- the rinse function is not performed.
Each of these signs is a signal to take steps to free the filter from debris.
Procedure Flow
Before removing the filter, it is necessary to stock up a container for draining water and dry rags, covering them with a machine and slipping them under the bottom. The fact is that even after discharge, a certain amount of water remains in it. Rags absorb liquid and protect the floor from moisture.
To ensure safety, it will be necessary to shut off the water and disconnect the machine from the electrical network, then water should be drained from the washing tank
This is done because in some models there are nodes that are not able to disconnect from the power supply instantly. After you make sure that the machine is completely turned off, you can begin to work. Before removing, the filter cover is unscrewed and pulled out of the socket.
After that, the following manipulations are carried out:
- Rinse under running water.
- Cleaning contaminated areas with a brush.
- Purification of limescale and getting rid of unpleasant odors by soaking in a solution of citric acid and water.
The filter seat in the machine is also cleaned, as debris can get stuck in it. To make the procedure easier, use a flashlight to illuminate dark areas.
The washer water is drained from the tank through the drain filter, slightly weakening its connection to the pump system, or through the emergency hose, which the latest models from Bosch and Samsung are equipped with
After removing debris and rinsing under running water, the clean part is replaced.
Problems and solutions
You may encounter a problem when cleaning the filter element. It consists in the fact that the lid does not rotate.
The drain filter cover must rotate freely against and in the clockwise direction. It does not move when the washing machine has never been cleaned after its purchase, and the filter has become attached as a result of prolonged use
In such a situation, if you have a brand car Indesit, put the machine on its side and remove the pump. If the model is without a cap, you will see a pump. If there is a cover, it must be removed. After that you need to disconnect the wires. Next, you will need to unscrew the bolts holding the part and disconnect the electrician from the pump.
The filter is then treated with WD-40, opened and cleaned. After the procedure, the actions are carried out in the reverse order. When screwing the cover, pay attention to how tightly it is twisted. A loose screw cap will let water through.
For machines of different brands and models, the characteristics are different, so before working, you must familiarize yourself with the corresponding section in the manual. Knowing their features, you will avoid difficulties. For example, in washing machines, the filter of which is fixed with a screw, you will need to first unscrew the screw.
The drain filter, as well as the emergency hose, if available in the model, are located below the decorative hatch that covers the units for servicing the machine
If the drain filter is not provided in the design, remove the washing machine body, check the cochlea, drain pump and nozzles. Read more about disassembling units from different manufacturers in this article.
For cars like Samsung, Ariston and Indesit, the drain filter is located below the front side. In models LG and Bosch, he is located behind a decorative hatch in the lower right.
Cleaning the inlet filter
In washing machines, there is also a filling filter element in the form of a mesh that does not allow foreign objects and impurities to pass through. Such devices are not provided in all models of machines.
Signs of clogging in the inlet filter are:
- reduced pressure of water entering the machine;
- increased washing time;
- the device works well, but when filling it buzzes and does not fill with liquid.
The element is connected to the inlet hose and is located near the water supply valve.
The water supply system filter is located at the top of the machine, in order to access it, you need to unscrew the water supply hose
Step-by-step cleaning instructions
To fix the problem you will need to clean the inlet filter.
This is done in the following sequence:
- Shut off water before cleaning.
- The filler tube is removed, after which the filter mesh will be visible.
- The grid is removed using pliers. This must be done carefully, as it is very fragile and can break.
- The recovered element is cleaned and washed with water.
- The clean filter is returned to its place and the hose is attached.
Models may vary in design, but the procedure remains the same.
The removed inlet hose or its individual parts are washed out of dirt under running water. Particularly contaminated areas are cleaned with an old toothbrush
Particular attention is paid to the filter, which is usually located under the cover, in range.
The inlet filter, which we need to clean, is a mesh covering the hole. It is a lightweight element made of metal or plastic.
It is not possible to clean the filter inside the washing machine, therefore it must be removed.
The resulting pollution must be removed. To do this, the filter is pulled out using pliers or a similar tool with narrow “paws”
When using pliers, you need to be as careful as possible so as not to damage the filter.
The more time has passed since the last cleaning of the filter, the more dirt accumulates on it, it gets worse water into the car. The filter removed from the socket is thoroughly washed, cleaned with a soft brush and put in place
The filter is affected by the quality of the water. The stiffer it is and the more impurities it contains, the more often it will be necessary to carry out cleaning. For the smooth operation of the machine, you can use special filters that are additionally installed for washing machines.
Types of pollution and factors causing them
Before cleaning the filters, it is necessary to determine the type of contamination and the reasons for their appearance. To prevent the formation of dirt, there are preventive methods and tools. Knowing the causes, consequences and ways to fix the problem, you will extend the operational life of your machine and ensure its smooth operation.
In addition to ordinary garbage falling into the washing machine along with things, ordinary dirt, limescale, scale and mold deposits can be considered as filter contaminants. To eliminate them, there are different ways and improvised means. With their help, you not only clean the filters, but also prevent the appearance of contaminants.
The causes of filter contamination are:
- hard water;
- particles, villi, separated from the clothes being washed;
- untimely cleaning and drying of all elements of the machine;
- poor quality powders and other detergents.
Consider the main types of pollutants and how to eliminate them.
Poor quality water is becoming one of the main reasons for the formation of scale and lime scale on filters and other parts. Professional and homemade products can be used to clean the washers.
As improvised cleaners can be used acetic or citric acid, soda. These are excellent cleaning products for every housewife.
Professional tools are selected in accordance with the functional features of the device and your financial capabilities.
A simple and affordable means is whiteness. Cleaning can be done mechanically, but not independently, but with the help of specialists who use special devices for these purposes.
If dirt, lint from clothing gets on the filter, as well as when cleaning and using poor-quality detergents in a timely manner, deposits of dirt, mold and an unpleasant odor are formed. Cleaning is carried out, as in the first case, by home and professional means.
A qualified plumber can help in determining the causes of filter contamination. He can also suggest which cleaning methods are the most effective.
In addition to vinegar and citric acid, the use of copper sulfate and soda, as well as whiteness, is recommended. After cleaning and rinsing, all parts must be wiped with a clean, dry cloth and dried.
Folk remedies in the care of the unit
Consider the main tools used to clean the drain filter, and how to use them. These are proven effective methods that you can use to prevent and clean filters with simple do-it-yourself tools.
The use of citric acid
Citric acid is an affordable and cheap odorless product.
It is not worth using citric acid, as well as using it at high temperatures, as it can damage plastic elements
Rules for using lemons:
- Pour 60-100 grams of acid into the powder container. The amount of the product is determined by the length of time during which the cleaning was not carried out.
- Turn on the device for a full cycle at a temperature of 60 degrees or more. The maximum temperature regime is selected if the machine is very dirty.
- Remove dirt and acid residues by rinsing. If the machine is not completely clean, repeat the procedure.
Upon completion, the filter is cleaned of the remaining plaque.
The washing process using citric acid was demonstrated in the video:
Soda filter cleaning
Soda is an affordable mold cleaner. Soda clean all the parts on which it is formed.
Mode of application:
- One to one soda is diluted with water.
- In a solution of water and soda, the fabric is moistened.
- An impregnated cloth is wiped with mold elements.
- After several hours, they start the wash.
- At its end, the remaining dirt is removed manually.
The procedure can be repeated several times, depending on the degree of contamination.
Using table vinegar
When using it, not only mold and scale are removed, but also an unpleasant odor.
Mode of application:
- 200 ml of 9% vinegar is poured into the powder tray.
- Include washing at a temperature of 60 to 90 degrees.
- After filling the machine with hot water, pause for 1 hour.
- Continue washing until complete.
- Clean the filter from the remaining pollution.
Then wipe all surfaces with a clean dry cloth and allow to dry.
Whiteness in the fight for cleanliness
The tool can be attributed to both professional and home. Simple and affordable, it has a pungent odor. Provides high-quality cleaning of the drain filter.
Method of use:
- White is poured into the powder filling container.
- They turn on the longest cycle with a high temperature for 15–20 minutes, put the machine on pause and leave it for 2 hours.
- Include washing and rinsing.
- Start the rinse cycle again.
At the end, dry the parts with a rag.
Application of copper sulfate
It is a great, easy to use, affordable, odorless product.
Copper sulfate is an absolutely harmless fungus remedy for machine parts. It can be purchased at a hardware store or market for summer residents
Instructions for use:
- A powdery substance (30 g) is diluted in 1 liter of water.
- Wipe all the insides of the machine and leave for a day.
- Launch the wash with any washing powder.
As in other cases, include an additional rinse program, and at the end of cleaning, wipe with a dry cloth.
If you don’t want to do dirty work yourself, you can call the plumber. Professional cleaning eliminates the need to do unusual work for you.
You can find out how the cleaning process works in practice and how effective it is from the videos below.
Cleaning the water filter system filter:
How to clean the drain filter:
Summing up, we can say that the operational life of an automatic washing machine depends on proper care. Cleaning can be done both independently and with a call to the house of specialists. Do this at least twice a year.
It’s easy to figure out how and how to clean the filters. To do this, you need to determine the type of contamination and the type of product that will help you remove it. The prophylactic methods available to every housewife are also effective. If you do not want to clean and wash the washing machine, call those who will do it efficiently and professionally.
Have something to supplement, or have questions about cleaning the drain and inlet filter of the washing machine? You can leave comments on the publication, participate in discussions and share your own experience in removing contaminants from machine parts. The contact form is located in the lower block.