Double-valve and single-lever water taps are installed on the sinks for mixing cold and hot water. They are extremely easy to operate and cheap.
But when the pressure in the pipes changes, their valves have to be tightened so that the flow temperature returns to the desired parameters. It would be nice to automate this process, right?
A modern thermostatic mixer allows you to level this small but annoying inconvenience. The range of models from various manufacturers is so rich that it is quite difficult to choose the right option. Do you have a hard time choosing? Or did you decide to install such a mixer yourself, but are you afraid of accidentally breaking something?
We will help you clarify these issues - the article describes the device, the principle of operation and the existing types of thermostat valves. A step-by-step installation algorithm is also provided.
In addition, we picked up informative photos, visual diagrams and detailed video instructions that will help any beginner choose the best mixer and master the installation process.
The principle of operation of a household mixer with a thermostat
Changing the pressure and temperature in the water supply pipes is an unpleasant situation faced by residents of both apartment buildings and private cottages. This is especially annoying in the morning, when the stream from the tap in the washbasin becomes either too hot or too cold.
This happens due to the fact that everyone in the house at this time begins to intensively use water for washing and bathing. Its consumption increases sharply, causing pressure drops.
The main task of a thermostatic mixer is to obtain in the spout an unchanged temperature flow of water for consumption in a wash basin or shower
According to domestic standards, the temperature of hot water in a centralized system can range from 50 to 70 degrees. The spread is large enough.
For communal workers this is a blessing; they may not have to worry much about going beyond the limits of standards. And consumers are forced to suffer from inconvenience. We have to install special control devices or constantly adjust the water supply in the tap.
Here thermostat mixers come to the rescue, all models of which are divided into three categories:
- Mechanical.
- Electronic.
- Non-contact.
The first are the most simple and affordable. The required temperature and water pressure are adjusted in them by means of a lever or valve, and the preset parameters are maintained by pure mechanics and changes in the physical properties of the internal elements of the device.
The second and third are already composed of electronic components that require constant power supply.
Image Gallery
Photo from
Thermostatic bathroom faucet
Device for economical water consumption
The subtleties of installing thermostatic valves
Thermostat operation in the event of a water outage
Type # 1 - instruments with mechanical adjustment
The operation of this type of mixer is based on the movement of a movable valve inside the device, which responds to changes in the parameters of the mixed water stream.
If the pressure increases in one pipe, the cartridge simply shifts and reduces the flow of water coming in for mixing from the other. As a result, the temperature in the spout remains the same.
The mechanical mixer has two control heads: the right one with a red-blue bar for setting the temperature and the left one with the designation “ON / OFF” for controlling the pressure
The internal moving valve contains material that sensitively and quickly responds to all changes in temperature of the water entering the mixing device.
In most cases, synthetic wax acts as a sensitive thermocouple sensor. Under the influence of temperature, it contracts and expands, which leads to the displacement of the locking cartridge.
Many mechanical models have a fuse on the control valve that limits the maximum temperature to 38 ° C. For a person, such indicators are considered the most comfortable.
But even in the absence of a fuse, hotter than 60-65 degrees water will not flow from the thermostatic mixer. Everything is designed so that when these temperatures are reached, the wax expands to the maximum, and the valve shuts off the DHW pipe - completely. Burns from boiling water are excluded here by definition.
Using a faucet with a thermostat is a guarantee of a comfortable and safe bathing even for the smallest children, its surface is never hot
Valve displacement occurs almost instantly inside. Any change in the temperature of the incoming water or its pressure leads to an immediate expansion / contraction of the thermocouple.
As a result, even strong fluctuations in the flow parameters in the hot water and cold water pipes do not affect the total flow in the spout. Water will flow from it exclusively with user-specified indicators.
Some models use bimetallic plates instead of wax. The principle of their action is similar. Under the influence of temperature, they bend and shift the valve to the desired depth.
Image Gallery
Photo from
Thermostatic mixer Grohtherm 800
Thermostat control knob
Automatic bath / shower switch
Bathroom Thermostat Protection
Type # 2 - devices with electronic filling
Faucets with electronic thermostats are more expensive, technically more complicated and require power supply. They are connected to the outlet through a network adapter or have a battery in their composition, which must be replaced regularly.
The electronic temperature controller is controlled by:
- remote buttons or on the mixer body;
- sensors;
- remote control.
Water indicators in this device are monitored by electronic sensors. In this case, all the numbers are displayed on a special LCD screen. The display often shows both temperature and pressure. But a variant with only one value is possible.
The external panel is very convenient for controlling the device: a small screen allows you to see the exact parameters of the current flowing from a thermostatic mixer
Often in everyday life, an electronic mixer-thermostat with a display is a device with excess functionality. Such equipment is more suitable for installation in medical institutions or other public institutions.
It is much more common in shower pools and toilet rooms in office buildings than in kitchens or bathrooms in private cottages.
However, if it is planned to build a “smart home” with various gadgets that simplify life, then a mixer with an electronic temperature regulator is just what is required. He certainly will not interfere in such a dwelling.
In addition to automatically controlling the temperature of the water for greater comfort in the bathroom, you can equip a warm floor so as not to depend on the mood of heat supply organizations in the cold season.
Image Gallery
Photo from
Electronic thermostat in the kitchen
Single lever water mixer
The device with a touch panel for control
Touch control option
The easiest touchpad option
Selecting a mode using a smartphone
Hidden way to install the thermostat
Mixer with infrared sensor
Choosing a faucet for the kitchen and bathroom
The principle of operation for all thermostatic faucets is similar. With the help of the adjustment, the required temperature is set once, and then the water supply valve simply opens.
They function identically, however, the model range is quite extensive. And each device has its own individual characteristics with advantages.
If, in addition to the standard spout, the mixer model involves connecting a branch for the shower, then the left regulator has an appropriate switch, and not just turns on / off the water
According to their purpose and installation point, thermostatic mixers are divided into four categories:
- for washing in the kitchen;
- with spout exclusively for the washbasin;
- for a bidet;
- with shower head and bath spout.
They are mounted on a wall, countertop or plumbing fixture using an open installation method. Or they are mounted in a closed way, when only the valves or levers and spout are visible. And all the internal parts with this installation are hidden behind the cladding on the wall.
Most often, thermostatic faucets are mounted in the bathroom. In the kitchen they are not so in demand. The temperature of the water in the kitchen sink has to be constantly changed - either you need cold to drink or fill the kettle, then warm to wash food, then hot to wash the dishes.
Continuously switching the thermocouple setting is not recommended. And the convenience of having a thermostatic mixer is reduced in this case almost to zero. And in the shower and washbasin, the temperature is just what is required to be constant. Here it is more relevant.
Pros and cons of various models
Mechanical mixers with an integrated thermostat are more reliable than electronic counterparts. They will cost less than their counterparts. And in the event of a breakdown, they are easier to repair.
But the models with the display are more accurate and easier to manage. But they can be repaired in case of malfunction only in a specialized center.
Thermostatic faucets with mechanical adjustment provide the desired temperature in increments of several degrees
Electronic devices are regulated smoothly, allowing you to specify in the settings any parameters in the working range for a particular model range. However, they do require power. In case of power outages, there is a risk of not only being left without electricity, but also of losing water supply.
Domestic water faucets with a thermostat:
- provide the necessary pressure with a stable temperature;
- completely safe in operation;
- reduce overspending;
- easy to do it yourself;
- exclude scalding and getting under an ice shower;
- save energy (if installed in an autonomous hot water system).
Their only drawback is the high cost. However, in return - comfort, economy and safety.
What to look for when choosing?
The material of manufacture of the mixer body should be carefully selected:
- bronze, copper or brass - the most durable and expensive;
- ceramics - not as reliable as metal, but it looks more attractive;
- silumin (aluminum-silicon alloy) - cheap and short-lived;
- plastic - the lowest price and lowest reliability.
It’s even more important to choose the right valve material for the thermostat shutoff valve. Leather and rubber options are cheap, but wear out quickly enough. If solid suspensions get into the tap with water, these gaskets can quickly fail.
Compared with a conventional mixer, their wear rate in a thermostatic analog is an order of magnitude higher. So it’s not long to bring the matter to a flood and clarification of relations with neighbors from below.
It is best to choose high strength ceramic valves. They themselves are durable and the saddle will not hurt.
But if the mixing device is installed precisely with them, then you should forget about the use of force when tightening the valve until it stops. The valve is unlikely to break, but the head of the thermostat will be torn off quickly.
If non-return valves and coarse filters are not included in the thermostatic mixer, then they must be purchased and installed.
The main problem of most faucets with thermostats is the differences in standard piping layouts for hot and cold water in Russia and Europe.
We have a domestic hot water pipeline according to the standard to the plumbing device, it is connected to the right, and they have to the left. However, these devices were mainly developed and manufactured by European manufacturers, according to their rules.
When choosing a thermostatic mixer, it is extremely important to find out from the seller the scheme for connecting water pipes to it. If the pipes are connected the other way around, then the thermostat will simply break.
Devices for baths and bidets must be adapted to Russian standards. Otherwise, you will have to change the configuration of the pipes, and this is an additional serious cost.
With kitchen models in this situation is somewhat simpler - they are connected through flexible taps that can be rearranged without problems
And the last moment is the presence of sufficient pressure in the water supply. The passports of thermostatic mixers indicate a minimum working pressure of 0.5 bar.
If in the pipes it is actually lower, the device will not be able to work properly. There is simply no sense in installing it in such a plumbing system.
Leaders in the production of heat mixers
When choosing a thermostat mixer, preference should be given to models specially made for Russia.
Recently, foreign manufacturers began to produce this plumbing under domestic standards and requirements. It is her who should be looked for in stores, so as not to rack their brains after installation.
It is necessary to distinguish between thermostatic (they are thermostatic) designed for valve heating systems (in the figure), and the considered mixing devices for sinks and showers
In the domestic market, faucets with a built-in thermostat are represented by the following brands:
- Oras (Finland);
- Cezares and Gattoni (Italy);
- Grohe, Kludi, Vidima and Hansa (Germany);
- Lemark (Denmark);
- Toto (Japan);
- NSK (Turkey);
- Iddis and SMARTsant (Russia).
The Germans are the undisputed leaders in this industry. But other manufacturers are trying to keep up, creating a line of different price classes.
Here it is more necessary to focus on the materials of manufacture and product design. However, one should not forget about the positive image won over the years.
Mixing tap installation with thermostat
In general, the installation of the mixer in question is practically no different from the installation of an analog of a conventional design without a temperature controller. It is only necessary not to be mistaken with the points of connection of hot and cold water to the device. Confusion will inevitably lead to breakdown of the thermostat.
If you cannot deploy the mixer for proper connection, you will have to swap the supply pipelines. The easiest way to do this is with flexible hoses. But it may be necessary to rebuild the wiring of the water supply system in close proximity to the mounted tap.
The installation procedure is as follows:
- The supply of hot and cold water at the riser is shut off.
- The existing crane is dismantled.
- Eccentric discs are installed on the pipes with their dilution under a new mixer.
- They are installed on their intended place of laying and decorative elements.
- The mixer with the thermostat is screwed on.
- Mounted parts (spout, watering can) are mounted.
- Water is turned on, and then the operability of the installed device is checked.
- The temperature of the water coming from the mixer-thermostat is adjusted.
To prevent leaks, a tow, FUM tape or other equivalent is used as a sealant.
Coarse filters and check valves should be installed on the water supply. The thermostatic mixer is quite demanding on the quality of the water entering it.
On the one hand, care should be taken to ensure that there is no other sediment in the sludge stream, and on the other hand, even the potential flow between the cold water and hot water pipes should be excluded.This fitting can not be mounted only in one case, if it is already in the housing of the mixing device.
Difficulties can arise only when installing a separate mixer, you will need to prepare a place for the main segment with an integrated temperature controller in advance and correctly connect all pipes to it
With flush mounting to the wall, only the spout and buttons or thermostat adjustment lever are visible. Everything else is closed by decor. The bathroom takes on a finished look. Just the perfect option, however, if the mixer breaks down, you will have to break the walls and remove the tiles to repair it.
Calibration of the temperature regulator is carried out by means of a special adjusting screw or valve under the protective cover of the device. To do this, you need a conventional thermometer and a screwdriver.
If the thermostat is not calibrated in accordance with the passport instructions, then the temperatures at the mixer valve can actually vary greatly.
Do you like original bathroom solutions? Then you may be interested in the information about the mixer-waterfall, discussed in this article.
Overview of the mixing valve with thermostatic control in the bathroom:
How the thermostat mixer works:
GROHE Thermostatic Mixer Step-by-Step Installation Guide:
The advantages of a thermostatic mixer are mass. The main obstacle to its mass use is the high cost of this device for many Russians.
An ordinary faucet with a mixing chamber without a thermostat will cost several times cheaper. But if comfort and safety are more important for you, then equipment with a built-in thermostat is worth the money.
Do you use a thermostatic mixer? Perhaps you installed it yourself? Please share your impressions of using such a smart device - what disadvantages have you found for yourself, and what pleases you the most.
Or are you just picking up your mixer model? Or maybe you had difficulties during the installation process - ask your questions in the comments section, and we will try to help you.