LEDs methodically displace from circulation not only household incandescent lamps, but also industrial lighting equipment. The desire to save money forces entrepreneurs and municipal authorities to look for less energy-consuming devices.
An excellent option for organizing lighting over a large area is the LED lamp E40, the design of which is compatible with many lamps in operation.
In this material we will talk about the design of LED lamps, their varieties and scope.
LED lamp device
Due to the large diameter of the base, the E40 LED bulb easily accommodates many electronic components. And its increased body volume allows you to evenly distribute heat, preventing the product from overheating.
Thanks to its design features, the E40 LED lamp also receives many other advantages.
General structural elements
E40 LED bulbs can be quite different in appearance. All of them are united only by the type of screw cap, the diameter of which is 40 mm. Despite the external differences, the design of such bulbs has common features.
Homogeneous open radiators that directly transfer thermal energy from a heated circuit board to the surrounding air are more preferred.
Their main components are as follows:
- Diffuser. It is a matte volumetric shell made of plastic, located around the LEDs. It provides the most even distribution of light around the entire circumference of the lamp.
- LED crystalsbeing direct light emitters. They are located on the printed circuit board and can be of three varieties: SMD, COB, Filament.
- Printed circuit board. It has the form of a heat-conducting metal plate, which promotes the transfer of heat from working LED crystals to the radiator.
- Aluminum or metal-plastic radiator. It is usually located between the cap and the bulb, has a ribbed shape designed to increase the heat transfer area of the bulb.
- Driver. It is a microcircuit that provides low-voltage and direct current LED crystals. A high-quality driver should not cause the lamp to flash during operation.
- Dielectric plastic or ceramic liner, which distinguishes between the energized base and other structural elements of the LED bulb.
- Screw metal base E40, with a diameter of 40 mm. It serves to mount the lamp in the luminaire and provides current transfer from the cartridge to the driver.
If the base of the LED lamp of type E40 is always the same, then the external shape of the bulb and radiator can vary greatly.
Image Gallery
Photo from
The device of the lamp E40 "Corn"
The driver inside the corn LED lamp
Sectional pear-shaped LED lamp
LED Light Drivers
A powerful light emitting crystal generates a lot of side heat. To maintain an acceptable operating temperature inside the housing of such lamps, a radiator with a large surface area is required.
Therefore, the size and shape of LED devices is largely due to their power and other technical characteristics.
Features of the Edison Base
The letter E in the marking of the threaded base owes its origin to the lamp inventor Thomas Edison, who patented this engineering solution more than 100 years ago.
Its design has not changed over the century due to a number of advantages:
- simplicity and durability of installation;
- large contact area with the inner surface of the cartridge;
- ease of production;
- the ability to install additional parts inside the base.
The most common screw base formats are E14, E27 and E40. The double-digit number in the marking indicates their outer diameter.
If the size of the screw cap of the bulb is smaller than the inner diameter of the cartridge, then an inexpensive adapter can be purchased. It will allow devices to fit each other
The E40 cap was previously used in arc mercury lamps and incandescent bulbs. Its large size was due to the need to increase the area of contact with the cartridge, as well as the desire to reduce the heating of the glass base in a narrow place.
E40 LED bulbs are made only to ensure compatibility with old luminaires. At present, there are no objective reasons for using such large socles.
Schematic diagrams
The cost and reliability of the E40 LED lamps largely depends on the quantity and quality of driver parts. And it is based on a microcircuit, which can be made in various functional options.
In the simplest version, the driver consists of a small capacitor and a voltage rectifier. The load current limiter is an SMD resistor located on the LED board. This elementary circuit does not even contain a transformer, which makes it necessary to use a strictly defined number of LEDs in it.
An LED lamp with the simplest circuitry can be repaired by a person with basic knowledge of electronics. And for soldering a burned-out LED, only a multimeter and a soldering iron are enough
In such a cheap option, the lamp light will be pulsating, which can adversely affect the overall health of people nearby.
The most sophisticated drivers for LED bulbs include the following structural elements:
- bridge rectifier with capacitive ballast limiting the input current;
- several capacitors of increased capacity located at different levels of the circuit;
- feedback system that allows you to adjust the voltage and current;
- dimming circuitry, making possible smooth control of the lamp luminosity.
A high-quality driver completely removes the pulsation of the LED lamp and stabilizes the voltage supplied to the LEDs.
The large internal volume of the LED bulb in E40 format allows you to easily place all the necessary elements of the chip in it
This increases the overall service life of the product and increases its efficiency. Complex schemes have disadvantages:
- big size;
- complexity of repair;
- high cost.
In addition to the two electrical circuits discussed, there are many intermediate options for the internal device driver. Consumers in demand are bulbs of various designs. For example, a lamp with a simple driver will be enough for night illumination of uninhabited industrial sites.
Varieties of LED lamps E40
Industrial lighting equipment is structurally much more diverse than domestic. Accordingly, the characteristics of the lamps for it require different. Of great importance is the directivity of the light, the ability to work in a continuous mode and the security of the case.
Image Gallery
Photo from
Single-sided LED lamp E40
Cylindrical LED Light Bulb
LED lamp with a semicircular radiator
Active Cooling LED Bulbs
Manufacturers follow the demand and offer consumers the following modifications of LED lamps:
- dustproof and waterproof;
- with an operating voltage of 110 or 220 V;
- angle of illumination from 120 to 360 degrees;
- power from 10 to 500 watts;
- from plastic, aluminum, heat resistant materials;
- with a matte, transparent bulb, with open LEDs;
- with light sensors, movement;
- dimmable;
- vibration resistant, explosion proof.
For lesser-known LED lamp manufacturers, additional options can be more of a marketing move than a real advantage. Therefore, the priority when buying should be given to lighting products of famous brands.
Features of industrial LED lamps
Lighting devices with a base E40 are used only in industrial and public spheres. Household products of this design are simply not produced.
Industrial fixtures are subject to increased requirements for reliability and resistance to external factors. Therefore, the E40 LED lamps operating in them also have a number of features:
- The value of the power factor is 0.9-0.95, and for household bulbs - 0.7-0.9.
- LEDs often have individual lenses that change the direction of the light flux.
- Extended operating temperature range. The driver in E40 bulbs is designed for heating to 110-120 ° C and cooling to -50 ° C frost.
- Increased service life - up to 10 years of continuous glow.
- The housing often has anti-vandal protection to prevent mechanical damage to the LEDs.
- The placement of LEDs on the board suggests the possibility of their replacement during repair.
- Most E40 lamps are protected from wind, rain and dust.
- The reinforced radiator allows you to actively remove heat during round-the-clock operation.
- Increased color rendering.
- Unlike mercury lamps, LED lamps do not require the installation of additional starting devices.
The above advantages significantly increase the cost of LED lamps with E40 socket. But due to the increased reliability and extended working life, such products reduce the operational costs of enterprises. Once you put such LED bulbs in the fixtures, you can not worry about them for several years.
LED bulbs, unlike mercury, are environmentally friendly, consume less electricity and are more durable with a similar light output
Lighting equipment with a base E40 is replaced by modern models rather slowly. The reason is the lack of new alternative standards for connecting removable LED lamps. Another brake on equipment upgrades is the indifference of industrial consumers to the design and obsolescence of devices.
Scopes of lamps of E40
The niche of devices with directional light flux in the industrial sphere has long been occupied by LED spotlights. Bulbs with E40 socket are allocated a niche of diffused lighting of large areas and premises.
Cold light is better perceived by the eyes of drivers at night, so road lighting is mainly done with E40 bulbs with high color temperature
The main places for their use are:
- Street territory of industrial facilities, warehouses, transport bases, public institutions.
- Roadside lampposts.
- Yards of private houses, cottages.
- Shopping and entertainment centers.
- Production workshops with high ceilings.
- Stadiums.
- Hangars.
- Playgrounds.
In winter, LED lamps are good in that when they get snow they do not create a temperature difference in different parts of the body. Due to this, the strength characteristics of their flasks are not violated.
The E40 base is a relic of the past, so it is unlikely in the future it will be used in new areas.
In the videos, the E40 LED bulbs are shown in operation, and their internal structure is also considered.
Comparison of LED lamps with different sockets:
Overview and internal arrangement of the E40 LED bulb:
Testing the high-power E40 LED corn lamp:
The native E40 base in LED bulbs is used less and less. The reason for this is the desire of manufacturers to please the maximum number of consumers. Often, they simply complete the products of the E27 format with an adapter for a larger diameter. However, this does not interfere with LED lamps with a forty-millimeter diameter base to efficiently illuminate large rooms and save money on utility and commercial enterprises.
Have questions about the topic of the article? You can ask them in the comment block, which is located under the article. You also have the opportunity to supplement this material with interesting information and facts that you know about LED lamps E40.